Drilling Methods 

 

 

Horizontal and directional drilling are methods of increasing a well's productivity while reducing the environmental footprint of an oil and gas operation. New technologies enable us to drill laterally or horizontally beneath the surface, as opposed to vertically, allowing for a wider range of possible well configurations.

Because horizontal and directional drilling methods often utilize existing vertical well bores, additional wells may be drilled without additional disruption to the environment. Utilizing this technique also helps maximize recovery from existing reservoirs by penetrating a greater cross-section of the formation, allowing substantially more oil to be produced while reducing the total number of wells required.

Horizontal Drilling

A horizontal well is drilled laterally at an angle between 70 to 110 degrees. In addition to reducing the environmental impact of the drilling process, horizontal drilling is more cost-effective, uses less produced water and creates less drilling waste. Horizontal drilling may also provide access to oil and gas in thin, tight reservoirs that may be inaccessible by vertical drilling.

Directional Drilling

Directional drilling techniques create a network of separate, interconnected well bores to enable drainage of multiple target zones. This technique is particularly effective in reservoirs having small or isolated accumulations of oil or accumulations at different depths. Directional drilling also greatly enhances offshore drilling efficiency by providing access to multiple targets from a single offshore platform.

 

Directional Drilling for Crude Oil:

Drilling Crude Oil

 

Directional Drilling for Natural Gas:

Drill Net

 

 

 

DuTemp Drilling Methods 

  • Horizontal Drilling
  • Directional Drilling
  • Directional Drilling for Crude Oil
  • Directional Drilling for Natural Gas

 

Back to "Divisions"

 

 

 

Copyright © 2008-2009 DuTemp Corporation. All Rights Reserved.